Please note: The shop is open limited hours over Easter Holidays. Please call or message before making the trip. Up to date hours will be posted on social media. Thanks, Jen

Ash, Dark Grey Furniture Paint, Fusion Mineral Paint
Ash - Fusion Mineral Paint, Dark Grey Mineral Paint, Furniture Paint, Charcoal Matte Paint
Ash - Fusion Mineral Paint, Dark Grey Mineral Paint, Furniture Paint, Charcoal Matte Paint
Ash, Dark Grey Furniture Paint, Fusion Mineral Paint

Ash, Dark Grey Furniture Paint, Fusion Mineral Paint

£25.95
£25.95
Sold out
Tax included. Shipping calculated at checkout.

Ash, Dark Grey Furniture Paint, Fusion Mineral Paint

Fusion Mineral Paint is a 100% acrylic paint with no fillers! The pigments are all derived from natural minerals, and the paint is 100% non-toxic with no lead, and no phthalates.

Plus – it’s got a built-in top coat that is UV, water, and stain resistant – meaning you don’t have to wax or seal it! 

Colour:

Ash is a dark grey furniture paint that has a blue undertone. Offering versatility and dimension, this particular grey speaks both softly and boldly. It’s a dynamic tone that never falls flat. 

Fusion Mineral Paint Key Features:

  • Minimal prep work
  • Easy application
  • Exceptional coverage
  • Gorgeous matte finish
  • No top coat required

What can I use Fusion Mineral Paint on?

Fusion is perfect for furniture but it can also be used on front doors, kitchen cabinets, smaller craft projects and much more!

How to use Fusion Mineral Paint

Clean your surface thoroughly with a good degreaser such as Fusion's TSP Alternative.

Scuff sand to smooth any imperfections and de-gloss the surface. For tricky, shiny or laminate surfaces you may need to use Ultragrip.

Paint 2-3 coats of Fusion Mineral Paint using a good synthetic brush such as Cling On Flat Brushes. This will give you a smooth finish.

Fusion Mineral Paint is normally touch dry in around 30 minutes but you'll need to wait 1-2 hours before recoating.

Do I need to Top Coat or Wax?

Fusion Mineral Paint fully cures in around 21 days - this means all of the water has left the paint and it has fully hardened. It cures to a durable finish so a top coat isn't always necessary. 

If you like, you can use Beeswax Finish to give a soft natural finish or use waxes create decorative effects. For high traffic areas you can apply Fusion's Tough Coat in Matte or Gloss or Stain and Finishing Oil (SFO) in Natural.

Base : waterbased
Coverage : approx 28 sq meter per 2 litre
Finish/sheen : matte                                                                                                        Clean up : water
Dry time : 30 min approx
Recoat time : 1-2 hours approx
Cure time : 21 days approx

Do you use a lot of this colour? Check out our cost-effective 2 litre bottles. Perfect for pro-painters and large projects. 


Back to Fusion Mineral Paint